This time we bring a 915nm high power semiconductor laser. The bottom of the laser module is equipped with a heat sink. Aluminum heat sink and cooling fan can effectively prolong the continuous working time of high-power lasers. There are three working modes of CW/TTL/Analog on the power supply for selection. The power of 60W ...
Please watch the following video first: It is a 520nm 2800mW green laser system. This laser supports 3 working modes: CW, TTL, Analog. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode. The laser output power can be adjusted by adjusting the operating ...
It’s a 638nm 15W semiconductor laser system.15W laser is high power, we have equipped a radiator in the laser head. The radiator at the bottom of the laser head has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. The CW/TTL/Analog on the back of the power supply has ...
This is 940nm 20W IR Laser Source. The laser head has a heat dissipation base, which can effectively extend the continuous working time of the laser. The radiator has two cooling fans. The back of the laser head and the power supply, the 3 working modes of the laser, CW/TTL/Analog are set from the back ...
It’s a 405nm blue-violet laser system. The laser power can be adjusted through the rotary button on the power supply. Its working voltage is 90~240V. This semiconductor laser is near TEM00 mode. The laser beam quality is very good and the stability is high. It is a commonly used laser light source in scientific research. Let’s ...
High-power lasers usually generate large amounts of heat, which can easily damage the laser tube for a long time. It is not recommended to use high-power lasers for a long time. Figure 1. Withou the seat sink, can not work continuously for a long time Sometimes, the user needs to make the high-power laser work ...
Abstract: In recent years, the application of high-power semiconductor lasers has been expanding, and they are more and more widely used in industry and medical treatment. The thermal characteristics of lasers seriously restrict their reliability and service life. In order to improve the reliability and prolong the service life of the device,high power semiconductor laser bars with ...
China’s laser industry has a strong geographical distribution. The Pearl River Delta region represented by Shenzhen mainly uses medium and small power laser processing equipment, while the Central China region represented by Wuhan Optical Valley is on the product line. More comprehensive, covering large, medium and small power equipment. In addition to these two largest ...
750nm Near IR Laser System 0~1500mW Output Power Adjustable CW and TTL Modulation Together Customized Requirements: Minimum Laser Spot at 20cm
