This is a 532nm SM Fiber laser Benchtop type. Output fiber SM / PM fiber optional, here is SM fiber. The working voltage is AC 100~240V wide range voltage. It supports button control and software control of laser. The laser output power is adjustable, the adjustment accuracy is 1mW, and the adjustment range is 10~100%. ...
This is a 2024 new model 532nm 5W high quality DPSS laser. The new laser has better heat dissipation and better stability than the 2023 model. It supports both CW and modulation working modes. The laser needs to be preheated for about 20 seconds before laser output can be generated. Adjust the laser output power to ...
This is a 528nm 10mW green laser system. It is configured with single-mode fiber. The screen can display the current power, and the power can be adjusted through the buttons. 10%~100% output power can be adjusted. The power regulation accuracy is 0.1mW. The highest power of this unit is 10mW, other output power can be ...
This is a 638nm 5Watt high-power semiconductor laser, and a heat sink is added under the laser module. There are CW/TTL/Analog 3 working modes switchable on the back of the laser power supply. In the video is a line laser, a 45° line lens was customized at the laser outlet. Its divergence angle is 45°, 30°~90° ...
It is 637nm 40W powerful laboratory red fiber coupled laser system. The laser module includes a radiator. The laser power supply has a current display and the ‘Adjustor’ knob can adjust the laser output. The three working modes of CW/TTL/Analog can be switched on the back of the power supply. When no optical fiber is installed, ...
Today we bring 488nm single-mode fiber laser module. This is a modular structure, and the desktop model can also be customized. The laser output power can be adjusted, and the adjustment range is 10% ~ 100%. The laser can be controlled by software, connected to the computer via RS232-USB. This laser adopts semiconductor laser chip, ...
Today, we are showing a 589nm yellow dpss laser system. The output power is 3000mW. It has two working modes, CW and Modulation, and the switch button is on the back of the laser power supply. Trigger is the modulation signal input interface. There is a protective cover on the connector of the laser module ...
Is is a 689nm red laser system. The output power of the laser is adjustable from 0 to 1800mW. It supports 3 working modes, CW/TTL/Analog. In TTL/Analog modulation mode, an external modulation signal needs to be connected. The following video demonstrates the CW working mode of the laser. This laser is equipped with a pluggable ...
Please watch the following video first: It is a 520nm 2800mW green laser system. This laser supports 3 working modes: CW, TTL, Analog. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode. The laser output power can be adjusted by adjusting the operating ...
It’s a 638nm 30W high power fiber coupled laser system. There are CW/TTL/Analog 3 working modes available on the back of the power supply. When TTL/Analog is selected, external signal access is required. A radiator is added to the bottom of the laser head to extend the continuous working time of the laser. The heat ...
