This time we bring a 915nm high power semiconductor laser. The bottom of the laser module is equipped with a heat sink. Aluminum heat sink and cooling fan can effectively prolong the continuous working time of high-power lasers. There are three working modes of CW/TTL/Analog on the power supply for selection. The power of 60W ...
It is 1064nm high power laser with heat sink at the bottom of the laser head. It adopts air cooling mode, with 2 cooling fans. The modulation mode can be selected from the original TTL or Analog, and upgraded to be compatible with both. When the key is turned ON, the laser starts to work. ...
It’s a 638nm 15W semiconductor laser system.15W laser is high power, we have equipped a radiator in the laser head. The radiator at the bottom of the laser head has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. The CW/TTL/Analog on the back of the power supply has ...
It is 532nm high power dpss laser with adjustable power supply, the output power can be adjusted from 0 to 5000mW. This laser support CW and TTL/Analog modulation working mode. And the cooling method of the laser is TEC and cooling fan. 5W is a very high laser power, it is necessary to wear safety ...
It’s 532nm fiber coupled laser system. It’s a output power tunable laser, 0~20W laser power can be adjusted by button. This laser has three working modes: CW, TTL modulation, Analog modulation. It coupled a SMA905 fiber, the coupling efficiency is about 80% at 400μm fiber. After turning on the laser, it need a few minutes ...
It is a 980nm 20W fiber coupled laser with adjustable power supply. 20W is very high power, we added a radiator at the laser bottom and the radiator includes two cooling fans. There are CW/TTL/Analog 3 working mode for this laser system. The fiber is 600μm multi-mode fiber with SMA905 interface. Installation introduction: 1. Connect ...
It’s a 355nm Ultra-violet lab laser system. Q-Switched laser at 355nm has the features of high peak power, high repetition rate, and short pulse duration, which is used in scientific research, biology and so on. 5W high power UV laser, water cooling mode is required. Let’s check it now.
This is a 13W RGB multi wavelength laser system with radiator. It supports CW and modulation. The white laser beam is a laser synthesized by red, green and blue lasers. Each laser has a separate control switch and power adjustment button. Let’s check it now.
808nm High power Pigtailed Laser diode + Multimode optial fiber + Drive circuit Fiber: Fiber Diameter 105μm / Numerical Aperture 0.22 / Fiber Connecter (FC/PC)
520nm 1500mW is 2018 new powerful green laser pointer. This is one of the most powerful and bright green laser pointer we have now, it is designed with a focusable lens, metal body. This video is show us 520nm 1500mW and 532nm 200mW two kind green laser pointer. Let’s check it now: Most powerful green laser ...
