Solid State Laser Lab laser source

Lab Line Laser System — 532nm 3W DPSS Laser

by Laser Explorer Posted on 233 views 0 comments
It’s a 532nm 3000mW DPSS laser system. It’s customized into a line laser. We added line lens, and the fan angle is 30°. The focal length is customized at 2 meters, and the light is the smallest at 2m. Installation is very simple. First, connect the laser head and laser power supply, then connect the ...
continue reading
Solid State Laser Lab laser source

532nm High Power Laser CW/TTL Modulation

by Laser Explorer Posted on 533 views 0 comments
It is 532nm high power dpss laser with adjustable power supply, the output power can be adjusted from 0 to 5000mW. This laser support CW and TTL/Analog modulation working mode. And the cooling method of the laser is TEC and cooling fan. 5W is a very high laser power, it is necessary to wear safety ...
continue reading
Lab laser source

20W 532nm Green Fiber Laser System

by Laser Explorer Posted on 638 views 0 comments
It’s 532nm fiber coupled laser system. It’s a output power tunable laser, 0~20W laser power can be adjusted by button. This laser has three working modes: CW, TTL modulation, Analog modulation. It coupled a SMA905 fiber, the coupling efficiency is about 80% at 400μm fiber. After turning on the laser, it need a few minutes ...
continue reading
Lab laser source

CivilLaser’s 980nm 20W IR Fiber Laser System

by Laser Explorer Posted on 628 views 0 comments
It is a 980nm 20W fiber coupled laser with adjustable power supply. 20W is very high power, we added a radiator at the laser bottom and the radiator includes two cooling fans. There are CW/TTL/Analog 3 working mode for this laser system. The fiber is 600μm multi-mode fiber with SMA905 interface. Installation introduction: 1. Connect ...
continue reading
Solid State Laser Lab laser source

355nm 5W Q-Switched Laser UV Laser Water Cooled Type

by Laser Explorer Posted on 418 views 0 comments
It’s a 355nm Ultra-violet lab laser system. Q-Switched laser at 355nm has the features of high peak power, high repetition rate, and short pulse duration, which is used in scientific research, biology and so on. 5W high power UV laser, water cooling mode is required. Let’s check it now.        
continue reading
Solid State Laser Lab laser source

405nm Semiconductor Laser Blue-Violet Laser Beam

by Laser Explorer Posted on 471 views 0 comments
It’s a 405nm blue-violet laser system. The laser power can be adjusted through the rotary button on the power supply. Its working voltage is 90~240V. This semiconductor laser is near TEM00 mode. The laser beam quality is very good and the stability is high. It is a commonly used laser light source in scientific research. Let’s ...
continue reading
Solid State Laser Lab laser source

Customized Fiber Coupled Laser with Guiding Laser Beam

by Laser Explorer Posted on 366 views 0 comments
This is 532nm 5W fiber coupled laser. It is a customized laser. Customized features is this laser system will output a low-power guide red laser before high-power green laser output. Add a modulation signal DC 0-5V, anlog modulation can adjust the 532nm laser’s output power. This test, we add 3.7V and we can get near ...
continue reading
Solid State Laser Lab laser source

808nm 10W Fiber Laser System with Collimator

by Laser Explorer Posted on 375 views 0 comments
It’s a 808nm 10W high power infrared fiber coupled laser. This 808nm laser system includes a laser head, a power supply, a fiber, a collimator. There are CW, TTL, Analog 3 working mode can be choosen. And the focal length of collimator is adjustable. Let’s check it now.    
continue reading