This is a 528nm 10mW green laser system. It is configured with single-mode fiber. The screen can display the current power, and the power can be adjusted through the buttons. 10%~100% output power can be adjusted. The power regulation accuracy is 0.1mW. The highest power of this unit is 10mW, other output power can be ...
This is a 638nm 5Watt high-power semiconductor laser, and a heat sink is added under the laser module. There are CW/TTL/Analog 3 working modes switchable on the back of the laser power supply. In the video is a line laser, a 45° line lens was customized at the laser outlet. Its divergence angle is 45°, 30°~90° ...
It is 637nm 40W powerful laboratory red fiber coupled laser system. The laser module includes a radiator. The laser power supply has a current display and the ‘Adjustor’ knob can adjust the laser output. The three working modes of CW/TTL/Analog can be switched on the back of the power supply. When no optical fiber is installed, ...
Today we bring 488nm single-mode fiber laser module. This is a modular structure, and the desktop model can also be customized. The laser output power can be adjusted, and the adjustment range is 10% ~ 100%. The laser can be controlled by software, connected to the computer via RS232-USB. This laser adopts semiconductor laser chip, ...
Please watch the following video first: It is a 520nm 2800mW green laser system. This laser supports 3 working modes: CW, TTL, Analog. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode. The laser output power can be adjusted by adjusting the operating ...
It’s a 638nm 30W high power fiber coupled laser system. There are CW/TTL/Analog 3 working modes available on the back of the power supply. When TTL/Analog is selected, external signal access is required. A radiator is added to the bottom of the laser head to extend the continuous working time of the laser. The heat ...
A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and flashlamp-pumped lasers in many scientific applications, and ...
The following is a demonstration of the operation of the desktop YDFA button control. Let’s check it now. This is a 50mW Ytterbium Doped Fiber Amplifier with PM Fiber. The working wavelength is 1030nm~1070nm. It supports ACC and APC working modes. We can switch the APC/ACC working mode with the left and right buttons. At ...
Today we are going to demonstrate a 543nm 100mW fiber coupled laser. The output can be adjusted by the rotary button on the power supply. There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply. This laser coupled a 1000μm, ...
1070nm SM fiber laser system. The maximum power is 1W, 10%~100% power can be adjusted, adjusted by button, the adjustment accuracy is 1mW. You can adjust the wavelength by adjusting the temperature. This is a custom function and is not supported by default. By default, the laser is controlled by the button, and it can also ...
