This is a 528nm 10mW green laser system. It is configured with single-mode fiber. The screen can display the current power, and the power can be adjusted through the buttons. 10%~100% output power can be adjusted. The power regulation accuracy is 0.1mW. The highest power of this unit is 10mW, other output power can be ...
It is 637nm 40W powerful laboratory red fiber coupled laser system. The laser module includes a radiator. The laser power supply has a current display and the ‘Adjustor’ knob can adjust the laser output. The three working modes of CW/TTL/Analog can be switched on the back of the power supply. When no optical fiber is installed, ...
This time we bring a 915nm high power semiconductor laser. The bottom of the laser module is equipped with a heat sink. Aluminum heat sink and cooling fan can effectively prolong the continuous working time of high-power lasers. There are three working modes of CW/TTL/Analog on the power supply for selection. The power of 60W ...
Today, we are showing a 589nm yellow dpss laser system. The output power is 3000mW. It has two working modes, CW and Modulation, and the switch button is on the back of the laser power supply. Trigger is the modulation signal input interface. There is a protective cover on the connector of the laser module ...
Is is a 689nm red laser system. The output power of the laser is adjustable from 0 to 1800mW. It supports 3 working modes, CW/TTL/Analog. In TTL/Analog modulation mode, an external modulation signal needs to be connected. The following video demonstrates the CW working mode of the laser. This laser is equipped with a pluggable ...
A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and flashlamp-pumped lasers in many scientific applications, and ...
It is 1064nm high power laser with heat sink at the bottom of the laser head. It adopts air cooling mode, with 2 cooling fans. The modulation mode can be selected from the original TTL or Analog, and upgraded to be compatible with both. When the key is turned ON, the laser starts to work. ...
Today we are going to demonstrate a 543nm 100mW fiber coupled laser. The output can be adjusted by the rotary button on the power supply. There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply. This laser coupled a 1000μm, ...
It’s a 638nm 15W semiconductor laser system.15W laser is high power, we have equipped a radiator in the laser head. The radiator at the bottom of the laser head has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. The CW/TTL/Analog on the back of the power supply has ...
This is 940nm 20W IR Laser Source. The laser head has a heat dissipation base, which can effectively extend the continuous working time of the laser. The radiator has two cooling fans. The back of the laser head and the power supply, the 3 working modes of the laser, CW/TTL/Analog are set from the back ...
