It’s a 638nm 15W semiconductor laser system.15W laser is high power, we have equipped a radiator in the laser head. The radiator at the bottom of the laser head has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. The CW/TTL/Analog on the back of the power supply has ...
This is a 26dBm polarization-maintaining EDFA. Control EDFA with buttons, and software control function can be added. It supports APC and ACC two working modes. Let’s check it now. Polarization-maintaining erbium-doped fiber amplifier (EDFA-PM) is a family of fiber amplifier products dedicated to polarization-maintaining fiber systems. It has the advantages of high gain, low noise, ...
This is 940nm 20W IR Laser Source. The laser head has a heat dissipation base, which can effectively extend the continuous working time of the laser. The radiator has two cooling fans. The back of the laser head and the power supply, the 3 working modes of the laser, CW/TTL/Analog are set from the back ...
This is a wavelength tunable fiber laser, packaged in a module. It use SM single-mode fiber, PM polarization-maintaining fiber can be customized. It controlled by software. If the software is opened, the Portlist is blank, and COM** cannot be found. Please check whether USB port driver on your computer is working properly. The adjustable wavelength ...
This is a video about laser OEM. As a professional laser manufacturer, CivilLaser can provide customized Logo services for laser dealers. In the video is the 532nm 10W DPSS Laser produced by us. We will demonstrate putting our logo sticker on the laser head. let’s check it now. If you need to add your own ...
This is the two-in-one light source DH2000 for the deuterium tungsten halogen lamp. Ultraviolet to near-infrared high-quality long-life scientific research wide-band light source. It is recommended to use anti-ultraviolet silica fiber when connecting to optical fiber. The deuterium lamp and the tungsten halogen lamp can be turned on separately or at the same time. After ...
It’s a 589nm yellow laser pointer. There are shading parts on the front of the laser flashlight. Before use, you need to open the shading sheet. The threaded metal part of the laser head expands the heat dissipation surface area, which is conducive to the long-term operation of the laser. The blue button is the ...
This is a 520nm 1W fiber coupled laser module. There are CW and TTL working mode. When CW working mode is required. Red and Yellow wire to DC 12V positive. Black and Green wire to DC 12V negative. When TTL working mode is required. Red wire to DC 12Vpositive. Black wire to DC 12V negative. ...
This is the UV deuterium lamp source with broadband wavelength. The wavelength range is 185nm~600nm. Among them, the ultraviolet band of 200nm~300nm has the highest power. The faint purple spot can be seen with the naked eye. Let’s check it now. D-2000 deuterium lamp can produce stable output spectrum of 190-400nm. The peak to peak ...
It’s a 520nm 15W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The’Adjustor’ knob on the power supply is used to adjust the size of the current to control the laser output power. The’CW|TTL|Analog’ on the ...
