Lab laser source

785nm NIR Fiber Laser All-in-one Type Lab Laser

by Laser Explorer Posted on 580 views
It is 785nm 3W fiber coupled laser system. This is a model in which the laser module and power supply are integrated. It support continuous work and modulation mode. The default is button control, software control function can be customized. The output power of the fiber output end is adjustable from 0 to 3W. And ...
continue reading
Solid State Laser Lab laser source

689nm Red Diode Laser Coupled SMA905 Fiber

by Laser Explorer Posted on 763 views
Is is a 689nm red laser system. The output power of the laser is adjustable from 0 to 1800mW. It supports 3 working modes, CW/TTL/Analog. In TTL/Analog modulation mode, an external modulation signal needs to be connected. The following video demonstrates the CW working mode of the laser. This laser is equipped with a pluggable ...
continue reading
Lab laser source

Most Powerful Lab Fiber Laser System — 638nm 30W Laser

by Laser Explorer Posted on 400 views
It’s a 638nm 30W high power fiber coupled laser system. There are CW/TTL/Analog 3 working modes available on the back of the power supply. When TTL/Analog is selected, external signal access is required. A radiator is added to the bottom of the laser head to extend the continuous working time of the laser. The heat ...
continue reading
Solid State Laser Lab laser source

543nm Fiber Laser Source Green Laser Beam

by Laser Explorer Posted on 349 views
Today we are going to demonstrate a 543nm 100mW fiber coupled laser. The output can be adjusted by the rotary button on the power supply. There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply. This laser coupled a 1000μm, ...
continue reading
Lab laser source

20W 880nm High Power Fiber Coupled Laser

by Laser Explorer Posted on 376 views
This is 880nm 20W high power infrared laser. A fiber coupling interface is added to the laser output port, which can be inserted into a fiber. A cooling device is added at the bottom of the laser module, which is composed of aluminum sheet and cooling fans. The laser supports CW continuous work and modulation ...
continue reading
Laser diode module

520nm Pigtailed Laser Module With TTL Modulation

by Laser Explorer Posted on 253 views
This is a 520nm 1W fiber coupled laser module. There are CW and TTL working mode. When CW working mode is required. Red and Yellow wire to DC 12V positive. Black and Green wire to DC 12V negative. When TTL working mode is required. Red wire to DC 12Vpositive. Black wire to DC 12V negative. ...
continue reading
Lab laser source

CivilLaser’s 980nm 20W IR Fiber Laser System

by Laser Explorer Posted on 1451 views 0 comments
It is a 980nm 20W fiber coupled laser with adjustable power supply. 20W is very high power, we added a radiator at the laser bottom and the radiator includes two cooling fans. There are CW/TTL/Analog 3 working mode for this laser system. The fiber is 600μm multi-mode fiber with SMA905 interface. Installation introduction: 1. Connect ...
continue reading
Lab laser source

Space Light-Single-Mode Fiber Positive Alignment Coupling Efficiency

by Laser Explorer Posted on 1038 views 0 comments
The electromagnetic field distribution on the fiber end face is a zero-order Bessel function, and the Gaussian distribution is generally approximated as: Where r0 is the mode field radius of a single-mode fiber; r is the radial distance from any point on the fiber end face to the center. When the light wave transmitted through ...
continue reading