It’s a 473nm 1mW laser pointer. The Transverse mode is near TEM00. This one requires 1 CR2 battery to supply power. The laser has stable power and is usually used in scientific research experiments. It is the best choice for low power 473nm laser.Let’s check it now. If you need a 473nm laser above ...
It’s 488nm 1mW blue laser module. This laser shape is line. Connect DC 3V, and it will work. The laser head can be rotated to adjust the focal length of the laser, change the thickness of the laser line. This is a customizable laser module, laser power, laser shape, and laser size can all be ...
It’s a 532nm 3000mW DPSS laser system. It’s customized into a line laser. We added line lens, and the fan angle is 30°. The focal length is customized at 2 meters, and the light is the smallest at 2m. Installation is very simple. First, connect the laser head and laser power supply, then connect the ...
It’s a laser diode module with special laser spot. The laser shape is a solid flat circle. Red/blue/green lasers can be customized into this circle laser module. The following video shows the actual effect of the 650nm laser module. Let’s check it now. Advantage： 1. High brightness of indoor and outdoor general; 2. The light ...
It is 532nm high power dpss laser with adjustable power supply, the output power can be adjusted from 0 to 5000mW. This laser support CW and TTL/Analog modulation working mode. And the cooling method of the laser is TEC and cooling fan. 5W is a very high laser power, it is necessary to wear safety ...
532nm and 520nm are two common wavelengths of green light. What is the difference between these two laser modules? Their green light is very similar, but the 520nm is more like grass green. The working principles of the 532nm and 520nm green lasers are also different. The 532nm laser is produced by the frequency doubling ...
It’s a 405nm blue-violet laser system. The laser power can be adjusted through the rotary button on the power supply. Its working voltage is 90~240V. This semiconductor laser is near TEM00 mode. The laser beam quality is very good and the stability is high. It is a commonly used laser light source in scientific research. Let’s ...
This is 520nm green laser module, the output power is 100mW. It has two working mode: CW and TTL modulation. Working in modulation mode, it supports 0~30kHz / 0-5V signal input. Let’s check it now.
It’s a 589nm yellow laser pen, and the laser power is 5mW. It use a CR2 3V battery. Install the battery with the positive terminal toward the tail. This pen is very portable.
It’s a 450nm high power blue laser system, the max output power is 50000mW. Heat sink can be added to laser head. And the output power can be adjusted by adjusting the current. This laser has three working mode: CW/TTL/Analog modulation.
